241
LOGO! Manual
A5E00380835-01
5.2 Setting the default values for LOGO!
You can set the following default values for LOGO!:
Clock settings
You can set the default values for time-of-day and date,
summertime/wintertime conversion and synchronization
in parameter assignment mode by means of the set
menu (“Clock” menu item)
in programming mode by means of the setup menu
(“Clock” menu item).
Time-of-day and date see Chapter 5.2.1.
Summertime/wintertime conversion see Chapter 3.7.13.
Synchronization see Chapter 3.7.14.
Contrast settings
You can set the default value for the display contrast
in parameter assignment mode by means of the set
menu (“Contrast” menu item)
in programming mode by means of the setup menu
(“Contrast” menu item).
See Chapter 5.2.2.
Start screen settings
You can select the default setting for the start screen
in parameter assignment mode by means of the set
menu (“StartScreen” menu item).
See Chapter 5.2.3.
5.2.1 Setting the time-of-day and date
(LOGO! ... C)
You can set the TOD and the date
in parameter assignment mode by means of the set
menu (“Clock” menu item)
in programming mode by means of the setup menu
(“Clock” menu item).
Confi
To Next Page
Loading...
