LOGO! Manual
A5E00380835-01
54
A small example in the first part of this chapter introduces
the operating principle of LOGO!.
We shall first show you the meaning of two basic terms,
namely the connector and the block.
As the next step, we shall create a circuit program
based on a simple conventional circuit, which you ...
can enter directly in LOGO! in the third step.
It will take you only a few pages of this manual store your
first executable circuit program in the LOGO! unit. With a
suitable hardware (switches etc.), you will then be able to
carry out first tests.
Pro
To Next Page
Loading...
