SIM5300E AT Command Manual V1.02
<Ncell>
0 Un-display neighbor cell ID
1 Display neighbor cell ID
<cell>
0 The serving cell
1-6 The index of the neighboring cell
<arfcn> Absolute radio frequency channel number, in decimal format
<rxl> Receive level, in decimal format
<rxq> Receive quality, in decimal format
<mcc> Mobile country code, in decimal format
<mnc> Mobile network code, in decimal format
<bsic> Base station identity code, in decimal format
<cellid> Cell id, in hexadecimal format
<lac> Location area code, in hexadecimal format
<rla> Receive level access minimum, in decimal format
<txp> Transmit power maximum CCCH, in decimal format
<TA> Timing Advance, in decimal format
<ID> Cell identifier
<dl_uarfcn> UMTS assigned radio channel
<psc> Primary scrambling code
<rscp> Received Signal Code Power
<rxlev> received signal strength in dBm
<tx_pwr> UE TX power in dBm. If no TX, the value is 0.
<ecn0> EC2N0 (dB - positive value presented positive) of serviceng cell.
To Next Page
Loading...
Need help?
General
