SimCom SIM5300E

SIM5300E AT Command Manual V1.02
122
Read Command
AT+CTTSPARAM?
Response
+CTTSPARAM: <volume>,<sysvolume>,<digitmode>,<pitch>,<speed>
，
<playover>,<savemode>
OK
Write Command
AT+CTTSPARAM=<volume>[,<sys
volume>[,<digitmode>[,<pitch>[
,<speed>[,<playover>[,<savemo
de>]]]]]]
Response
OK
If error is related to MS functionality, response:
+CME ERROR: <err>
Parameter <volume> TTS volume
0 low volume
1 normal volume(Default value)
2 high volume
<sysvolume> System volume
0 min volume
1 low volume
2 normal volume (Default value)
3 high volume
<digitmode> read digital mode
0 auto mode, digital mode is high priority (Default value)
1 auto mode, telegraph mode is high priority
2 telegraph mode
3 digital mode
<pitch> pitch
0 low pitch
1 normal pitch (Default value)
2 high pitch
<speed> tone speed
0 slow speed
1 normal speed (Default value)
2 quick speed
<playover>
0 return +CTTS: 0 when finish playing TTS (Default value)
1 return +CTTS:0,1
when finish playing TTS, and return
+CTTS:0 later to indicate that the TTS session ends.
<savemode>
0 forbid running another TTS playing command when playing
SIMCOM CONFIDENTIAL FILE