SimCom SIM5300E

SIM5300E AT Command Manual V1.02
129
Test Command
AT+CGQREQ=?
Response
+CGQREQ: <PDP_type>,(list of supported <precedence>s),(list of supported
<delay>s),(list of supported <reliability>s),(list of supported <peak>s),(list of
supported <mean>s)
[<CR><LF>+CGQREQ: <PDP_type>,(list of supported <precedence> s),(list of
supported <delay>s),(list of supported <reliability>s
),(list of supported
<peak>s),(list of supported <mean>s)
[…]]
OK
Read Command
AT+CGQREQ?
Response
+CGQREQ: <cid>,<precedence>,<delay>,>reliability>,<peak>,<mean>
[<CR><LF>+CGQREQ:<cid>,<precedence>,<delay>,<reliability>,<peak>,<me
an>
[…]]
OK
Write Command
AT+CGQREQ=cid>[,<precedenc
e>[,<delay>[,<reliability>[,<pe
ak>[,<mean>]]]]]
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters <cid>
1..10
A numeric parameter which specifies a particular PDP context
definition (see +CGDCONT command)
<precedence>
0 QOS precedence class subscribed value
1..3 QOS precedence class
<delay>
0 QOS delay class subscribed value
1..4 QOS delay class subscribed
<reliability>
0 QOS reliability class subscribed value
1.. 5 QOS reliability class.
<peak>
0 QOS peak throughput class subscribed value
1.. 9 QOS peak throughput class
<mean>
SIMCOM CONFIDENTIAL FILE