SimCom SIM5300E User Manual

SIM5300E AT Command Manual V1.02
70
Execution Command
AT+CMGL
If text mode:
the same as AT+CMGL="REC UNREAD", received unread messages
If PDU mode:
the same as AT+CMGL=0, received unread messages
See more messages please refer to Write Command.
Parameters <alpha>
String type(string should be included in quotation marks)
alphanumeric representation of <da> or <oa> corresponding to the entry
found in MT phonebook; implem
entation of this feature is manufacturer
specific; used character set should be the one selected with Command Select
TE Character Set +CSCS (see definition of this Command in 3GPP TS 27.007)
<da> GSM 03.40 TP-Destination-Address Address-Value field in string
format; BCD numbers (or GSM default alphabet characters) are converted to
characters of the currently selected TE character set (refer Command+CSCS
in 3GPP TS 27.007); type of address given by <toda>
<data> In the case of SMS: GSM 03.40 TP-User-Data
in text mode
responses; format:
If <dcs> indicates that GSM 03.38 default alphabet is used and <fo> indicates
that GSM 03.40 TPUser-Data-Header-Indication is not set:
If TE character set other than "HEX" (refer Command Select TE Character Set
+CSCS in 3G
PP TS 27.007):ME/TA converts GSM alphabet into current TE
character set according to rules of Annex A
If TE character set is "HEX": ME/TA converts each 7-
bit character of GSM
alphabet into two IRA character long hexadecimal number (e.g. character P
(GSM 23) is presented as 17 (IRA 49 and 55))
If <dcs> indicates that 8-bit or UCS2 data coding scheme is used, or <fo>
indicates that GSM 03.40 TP-User-Data-Header-
Indication is set: ME/TA
converts each 8-bit octet into two IRA character long hexadecimal number
(e.g. octet with integer value 42 is presented to TE as two characters 2A (IRA
50 and 65)) In the case of CBS: GSM 03.41 CBM Content of Message in text
mode responses; format:
If <dcs> indicates that GSM 03.38 default alphabet is used:
If TE character s
et other than "HEX" (refer Command +CSCS in 3GPP TS
27.007): ME/TA converts GSM alphabet into current TE character set
according to rules of Annex A
If TE character set is "HEX": ME/TA converts each 7-
bit character of GSM
SIMCOM CONFIDENTIAL FILE

SimCom SIM5300E Specifications

General

Brand	SimCom
Model	SIM5300E
Category	Control Unit
Language	English