SIM5300E AT Command Manual V1.02
0 Normal
1 Not change status of the specified SMS record
Response
TA returns messages with status value <stat> from message storage <mem1>
to the TE. If status of the message is 'received unread', status in the storage
changes to 'received read'.
1)If text mode (+CMGF=1) and Command successful:
for SMS-SUBMITs and/or SMS-DELIVERs:
+CMGL: <
inde
x>,<s
t
at
>,<oa/d
a>[,<alp
ha>]
[,<sc
ts>]
[,<t
ooa/t
oda>,
<leng
th>]
<CR><LF><data>
[<CR><LF>+CMGL:
<inde
x>,<s
ta
t>,
<da/
oa
>[,<a
lpha>][
,<scts
>][,
<tooa
/to
da>,<le
ngth
>]
<CR><LF><data>[...]]
for SMS-STATUS-REPORTs:
+CMGL: <index>,<stat>,<fo>,<mr>[,<ra>][,<tora>],<scts>,<dt>,<st>
[<CR><LF>+CMGL:
<index>,<stat>,<fo>,<mr>[,<ra>][,<tora>],<scts>,<dt>,<st>[...]]
for SMS-COMMANDs:
+CMGL: <index>,<stat>,<fo>,<ct>
[<CR><LF>+CMGL: <index>,<stat>,<fo>,<ct>[...]]
for CBM storage:
+CMGL:<index>,<stat>,<sn>,<mid>,<page>,<pages>
<CR><LF><data>
<CR><LF
>+CMGL
: <ind
ex>
,<s
ta
t>,<sn
>,<mid>
,<pa
ge
>,<p
age
s>
<CR><LF><data>[...]]
OK
2)If PDU mode (+CMGF=0) and Command successful:
+CMGL:<index>,<s
ta
t>[,<alpha>],<length>
<CR><LF>+CMGL: <index>,<stat>[,alpha],<length>
OK
3)If error is related to ME functionality:
+CMS ERROR: <err>
To Next Page
Loading...
Need help?
General
