SIM5300E AT Command Manual V1.02
Write Command
AT+CMGR=<index>[,<mode>]
Response
TA returns SMS message with location value <index> from message storage
<mem1> to the TE. If status of the message is 'received unread', status in the
storage changes to 'received read'.
1) If text mode (+CMGF=1) and Command successful:
for SMS-DELIVER:
+CMGR:
<sta
t>,
<oa>[
,<alph
a>],<s
cts
>[,<too
a>,<
fo>
,<pid>
,<dcs>,
<sca
>,<tos
ca>
,<leng
th>]
<CR><LF><data>
for SMS-SUBMIT:
+CMGR:
<sta
t>,
<da>[
,<alph
a>][,<t
od
a>,<f
o>,<pi
d>,<dcs
>[,<
vp>],<s
ca>,<
tosc
a>,<
leng
th>]
<CR><LF><data>
for SMS-STATUS-REPORTs:
+CMGR: <stat>,<fo>,<mr>[,<ra>][,<tora>],<scts>,<dt>,<st>
for SMS-COMMANDs:
+CM
GR: <
stat>,<fo>,<
ct>[,
<pi
d>[,
<mn>][
,<d
a>][,
<toda>]
,<length><CR><LF><cdata>]
for CBM storage:
+CMGR:
<s
tat>
,<sn>,
<mid>
,<dcs>
,<pa
ge>,
<pa
ge
s><CR
><LF
><dat
a>
2) If PDU mode (+CMGF=0) and Command successful:
+CMGR:
<s
tat>
[,<alph
a>],
<leng
th><CR
><LF>
<pdu>
OK
3) If error is related to ME functionality:
+CMS ERROR: <err>
Parameters
<index> Integer type; value in the range of location numbers supported by
the associated memory
<mode>
0 Normal
1 Not change status of the specified SMS record
<alpha> String type
(string should be included in quotation marks)
To Next Page
Loading...
Need help?
General
