Trunks
6-10 Strata CIX Programming Vol.1 12/09
13 Immediate Cut-
Through
This option should be enabled on a line only if the talk-path must be established
immediately after seizing a selected outgoing line.
Example, a line connected to a Central Office Ringdown circuit.
Possible values:Enable, Disable (default)
CAUTION! This option will bypass Destination Restriction and E911 digit
analysis. Do not enable this option on a line where these
functions are required.
This option is available only on Ground and Loop, analog or T1 circuits. It should
not be enabled for Tie, DID, ISDN and StrataNet lines.
14 CO Line Guard Time The interval between the release of a CO line and its eligibility to be seized again.
F
IELD DESCRIPTION
To Next Page
Loading...