Strata CIX Programming Guidelines
Use Default Auto-programming to Start Up
1-8 Strata CIX Programming Vol.1 12/09
.
Table 1-11 LIPU Strata Net Automatic Settings
Item Description Settings
Card Type Card Type LIPU
IP address (LIPU) IP address of LIPU In the order of smallest number of the slot
where the LIPU is inserted
192.168.254.200 for 1st LIPU
.201 for 2nd LIPU
.202 for 3rd LIPU
Private address will be set
Subnet mask (LIPU) Subnet mask of LIPU 255.255.255.0
Default gateway Default gateway of LIPU 0.0.0.0
Table 1-12 Strata Net IP-Trunk Information
Trunk Type Assignment
Run Programs in Sequence from left to right
Strata Net Basic 304 306
Node 656 651 653 654 655
Remote node 670
Mapping 657 658 659 660
Network over IP 672 671
Table 1-13 System Information
Item Description Settings
QoS control Priority control by Diffserv.
IEEE802.1p
Diffserv: Disable
DS Field: 0
IEEE802.1p: Disable
Priority: Voice (6)
To Next Page
Loading...