IP Telephone Programming
IP Telephone Installation and Network Connection Setup
Strata CIX Programming Vol.1 12/09 8-15
IP Telephone
Programming
12 IPU/IPH Packet
Prioritization Type
When Packet Prioritization is enabled select the type of prioritization.
Possible values:Best Effort, Voice
The default value is: Voice
13 IPU/IPH VLAN Enable or Disable VLAN tagging
Possible values:Enable, Disable
The default value is: Disable
14 IPU/IPH VLAN ID Set the VLAN ID
Possible values:1 ~ 4094
The default value is: 1
15 LIPS Packet
Prioritization
Enable or Disable Packet Prioritization
Possible values:Enable, Disable
The default value is: Disable
16 LIPS Packet
Prioritization Type
When Packet Prioritization is enabled, select the type of prioritization.
Possible values:Best Effort, Voice
The default value is: Voice
17 LIPS VLAN Enable or Disable VLAN tagging
Possible values:Enable, Disable
The default value is: Disable
18 LIPS VLAN ID Set the VLAN ID
Possible values:1 ~ 4094
The default value is: 1
19 IP Strata Net RTP
Base Port (IPU/IPH)
The base port number of the 32 port range for IP Strata Net RTP protocol can be
set for individual MIPU, LIPU, or GIPx cards.
Possible values:16384 ~ 16511
Note Only even port numbers can be assigned.
20 Strata Net RTP Base
Port (LIPS)
The base port number of the 32 port range for IP Strata Net RTP protocol can be
set for individual MIPU, LIPU, or GIPx cards.
Possible values:16384 ~ 16511
Note Only even port numbers can be assigned.
21 DHCP for MIPU/GIPU Enable: MIPU/GIPx can get an IP Address via DHCP.
Disable: IP Address must be assigned.
Note MIPU/GIPU only. LIPU, LIPS, and BIPU do not support DHCP.
22 MIPU Primary DNS Domain Name System (DNS) server that translates IP address to the
corresponding computer or domain name. The IP address consists of four octets.
Enter the first octet address from 0-255. This feature only pertains to the IP card.
F
IELD DESCRIPTION
To Next Page