IP Telephone Programming
IP Telephone Installation and Network Connection Setup
Strata CIX Programming Vol.1 12/09 8-23
IP Telephone
Programming
04 Not Used
05 COS Day1 Class of Service for Day1 mode
Possible values:1~32
•
Day2
Class of Service for Day 2 mode.
Possible values:1~32
• Night
Class of Service for Night mode.
Possible values:1~32.
06 DRL Day1 Destination Restriction Level for Day1 Mode (used for credit card calling)
Possible values:1~16
• Day 2
Destination Restriction Level for Day2 Mode.
Possible values:1~16
• Night
Destination Restriction Level for Night Mode.
Possible values:1~16
07 FRL Day1 Facilities Restriction Level for Day 1 Mode.
Possible values:1~16s
• Day 2
Facilities Restriction Level for Day 2 Mode.
Possible values:1~16s
• Night
Facilities Restriction Level for Night Mode.
Possible values:1~16
08 LCR Group Least Cost Routing Group Number
Possible values:1~16
09 QPL Day1 Queuing Priority Level for Day 1 Mode.
Possible values:1~16
•
QPL Day 2
Queuing Priority Level for Day 2 Mode.
Possible values:1~16
• QPL Night Queuing Priority Level for Night Mode.
Possible values:1~16
10 Name to Display Enter the name that should be displayed on telephone LCDs for this PDN.
Possible values:16 ASCII characters
11 Dialing Progress
Tone
Type of tone to hear after dialing LCR access code.
Possible values:Dial Tone (Default), Entry Tone, or Silence
12 System Call
Forward
System Call Forward group number.
Possible values:0~4 (CIX100), 0~10 (CIX200, CIX670/1200 Basic),
0~32 (CIX670 Exp), 0~48 (CIX1200 Exp)
F
IELD DESCRIPTION