IP Telephone Programming
IP Telephone Installation and Network Connection Setup
Strata CIX Programming Vol.1 12/09 8-25
IP Telephone
Programming
21 Travel COS
Change
Privilege Change the Travelling Class of Service Override Code.
Possible values:Enabled or Disabled (Default)
22 TGAC Override Trunk Group Access Code Override for attendant console.
Possible values:Enabled or Disabled (Default)
23 Service Tones Disable Services Tone for Data Privacy. Service tone, such as Call Waiting Tone,
should be disabled for modems, FAXes, and similar devices.
Possible values:Enabled (Default) or Disabled
24 Call Waiting Tone Enable/Disable the station to receive Call Waiting (Camp-on) and Ring Over Busy
(ROB) Tone.
CW tone is always two beeps.
ROB tone can be two beeps or continuous as set in PRG 204, 27.
Possible values:Enabled (Default) or Disabled
25 Dial Directory The telephone User Name will appear in the display of large LCD (Directory
Assistance).
Possible values:Enabled (Default) or Disabled
26 Door Over DND Enable DND to be overridden by a door phone.
Possible values:Override or Not Override (Default)
27 Set System Speed
Dial
Privilege to set System Speed Dial numbers.
Possible values:Enabled or Disabled (Default)
28 Network COS Network Class Of Service number.
Possible values:1 (Default) ~ 32
29 Auto OCA OCA occurs automatically when making a call to a busy station that allows OCA calls to
be received.
Possible values:Enabled (Default) or Disabled
30 Originate OCA The privilege to make OCA calls to other stations.
Important Note: This privilege must be disabled for all voice mail and auto attendant
ports.
Possible Values: Enabled (Default) or Disabled
31 RSTU
Supervision
Devices connected to RSTU circuits that do not automatically hang up, and connect to
CO lines that do not provide disconnect supervision should be set with Not Received.
This enables the auto disconnect Tandem timer in PRG 104, PB06 for these types of
connections.
Possible Values: Received (Default) or Not Received
32 Station SpDial
Bins
The number of station speed dial bins allocated to this station.
Possible values:0 ~ 100 (maximum=100 per station).
F
IELD DESCRIPTION
To Next Page
Loading...