Margin value to the calculated noise level for RT60
calculations: 0 ÷ 20 dB.
Name of the Logger file in which data of the RT60
analysis will be recorded.
Threshold level of the sound source for triggering the
RT60 measurement. If the measured sound is below the
Level value, the RT60 measurement will not start.
Display mode that presents the Bark spectrum.
Screen that enables setting the STIPA parameters:
Project, Area, Source, Averaging, Standard,
Measurement Unit, and Source Calibration.
Position enabling selecting the catalogue in the
instrument memory which contains Area catalogues.
Position enabling selecting the catalogue in the
instrument memory which contains Source catalogues.
Position that enables selecting the catalogue in the
instrument memory which contains files with STIPA
measurement results.
Type of STIPA results averaging: Manual or Auto.
To Next Page
Loading...
