Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer - Analyze Data; Export Results from the Instrument (Sample Data Files and QC Reports)

Export results from the instrument (sample data files and QC
reports)
In the home screen:
1.
Touch Seings4Run history.
2.
Select one or more plates from the Run History table.
3.
Touch Export.
4.
Select a storage location.
The following data is exported for the plate:
• Fragment/HID analysis—FSA le for each sample.
• Sequencing—AB1 le for each sample.
• Plate QC report in CSV and PDF format.
Note: If you select a plate, select View, then select Export, only an FSA or AB1 le for
each analyzed sample is exported.
Analyze data
1.
Export results (see “Export results from the instrument (sample data les and QC
reports)“ on page 121) or use auto exported data.
2.
Use an appropriate fragment analysis or sequencing application to analyze the
data.
Note: Data from the SeqStudio
™
Genetic Analyzer may be labeled as "3200" in
secondary analysis software.
For more information, see “Secondary analysis software“ on page 29
Chapter 8 View and analyze results
Export results from the instrument (sample data files and QC reports)
8
SeqStudio
™
Genetic Analyzer Instrument and Software User Guide
121