Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer - Create Your Own Local Instrument Profile; Change Your Own Local Instrument Profile PIN; Manage Storage Space; Automatic File Cleanup

4.
Touch Delete PIN.
The user will be prompted for a new pin upon the next sign in.
5.
Touch Yes to conrm.
6.
Touch Done.
If you are not signed in to the instrument when you link the instrument to your
Connect cloud-based platform account, the software creates a local instrument prole
with the Standard role using the FirstName LastInitial of your Connect platform
account.
For more information, see “Link the instrument to your Connect cloud-based
platform account“ on page 136.
Sign in to access these features (see “Sign in“ on page 34).
1.
Touch
.
2.
Touch Edit.
3.
Touch Old PIN, enter your current PIN, then touch Enter.
Touch the Show PIN checkbox to switch the PIN display on or o.
4.
Touch PIN (4 digits required), enter a new four-digit numerical PIN, then touch
Enter.
5.
Touch Conrm PIN, reenter your new PIN, then touch Enter.
6.
Touch Done.
Manage storage space
Before starting a run, the instrument calculates the total amount of storage space
required to save the run to the instrument. If the required storage space is not
available, the instrument deletes les associated with the oldest exported plates until
sucient space is available.
Note: Only complete plates that have been auto exported (saved to Connect cloud-
based platform, network, or USB) or manually exported (using Seings4Run
History4plate name4Export) are deleted.
If the required storage space is not available and no plates have been exported, the
instrument displays a notication indicating that there is not enough storage space.
You can export plates and delete plates, then start the run again.
Create your own
local instrument
profile
Change your own
local instrument
profile PIN
Automatic file
cleanup
Chapter 10 Manage the software (instrument)
Manage storage space
10
SeqStudio
™
Genetic Analyzer Instrument and Software User Guide
153