Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer - Seqstudio Genetic Analyzer Cathode Buffer Container; Radio Frequency Identification

The SeqStudio
™
Genetic Analyzer Cathode Buer Container (CBC) contains running
buer for capillary electrophoresis. The container has two compartments. The rear
compartment provides the cathode buer for electrophoresis. The front compartment
is for capillary wash and waste.
The CBC requires a Reservoir Septa.
See “Assemble the SeqStudio
™
Genetic Analyzer Cathode Buer Container (CBC)“ on
page 166.
1
45
3
2
Figure 7 SeqStudio
™
Genetic Analyzer Cathode Buffer Container with Reservoir Septa
1
Reservoir Septa
2
Notch (inserted towards the rear right in the autosampler)
3
Fill line (replace the CBC when the buffer is at the fill line)
4
Cathode buffer compartment
5
Waste and wash compartment
1
4
2
3
Figure 8 Autosampler
1
Location of plate or tubes
2
Release button
3
Location of Cathode Buffer Container
4
Location to position the Cathode Buffer Container notch
The cartridge and cathode buer have radio–frequency identication (RFID) tags. The
instrument reads and tracks:
• Expiry date (shelf life)
• Remaining injections (usage)
• Serial number (cartridge only)
• Lot number (cathode buer only)
SeqStudio
™
Genetic Analyzer
Cathode Buffer
Container
Radio frequency
identification
Chapter 1 Product information
SeqStudio
™
Genetic Analyzer consumables
1
20
SeqStudio
™
Genetic Analyzer Instrument and Software User Guide