Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer - Use the Instrument When the SAE Server Is Offline; Auditing of Imported Plate Setups

Use the instrument when the SAE server is offline
If your SAE administrator has congured your instrument to allow use when the SAE
server is oine (Client oine login System seing in the SAE module), you can use
the instrument for the period of time specied by the SAE administrator for Client
oine login.
Note: If you have not previously signed in to the instrument with your SAE account,
you cannot sign in when the SAE server is oine.
All SAE records are retained if the instrument is disconnected from an SAE server.
When the instrument is reconnected to the SAE server, SAE records are uploaded to
the server.
The following functions are not available when the SAE server is oine:
• Account lockout, password reminder, mandatory password change
• Disable SAE
• Change Password
Auditing of imported plate setups
If you import a plate setup, the following auditing occurs.
Note: You can import only one plate setup at a time.
If the file was created on...
And your instrument has
SAE enabled and is
configured to...
Then the following occurs
A different instrument with
SAE enabled
——
• The plate is imported.
• Auditing is restarted.
A different instrument with
SAE disabled
Open files from non‑SAE
systems=Forbidden
• An "Incomplete audit
trail" message is
displayed.
• The plate is not
imported.
A different instrument, and
the plate setup was:
• Created with SAE or
plate auditing enabled
• Modified when SAE or
plate auditing was
disabled
Open files from non‑SAE
systems=Allowed
• An "Incomplete audit
trail" message is
displayed.
• You can touch Yes to
import the plate.
Chapter 4 Use the instrument with the Security, Auditing, and E‑signature (SAE) v2.0 module
Use the instrument when the SAE server is offline
4
SeqStudio
™
Genetic Analyzer Instrument and Software User Guide
65