Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer - Manage the Software (Plate Manager)

Manage the software (Plate
Manager)
■
Add a custom dye calibration to the Plate Manager ...................... 122
■
Download a plate setup template as a CSV le .......................... 122
■
Save a plate setup as a PDF ........................................... 123
■
Save a plate setup as a CSV le ........................................ 123
■
Create a plate setup template ......................................... 123
■
Delete plate setups .................................................. 124
■
Manage email notications in the Connect cloud-based platform .......... 124
■
Manage run modules ................................................ 125
■
Manage size standards ............................................... 125
■
Manage analysis seings ............................................. 126
Add a custom dye calibration to the Plate Manager
On the instrument:
1.
Open a plate setup that species the custom dye set of interest.
2.
Export a plate setup that species the custom dye.
3.
Open the exported plate setup in the Plate Manager.
The custom dye is imported and is available for selection when you create new
plates.
Download a plate setup template as a CSV file
1.
Click
to display the home screen.
2.
Click New, select Create from template, then click Download for the template of
interest.
Note: You cannot add plate setups to the list of templates. However, you can create a
plate setup with "Template" sux, and use it as a starting point for creating new plate
setups.
9
122
SeqStudio
™
Genetic Analyzer Instrument and Software User Guide