Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer - G Instrument Specifications and Layout; Instrument Dimensions

Instrument specifications and layout
■
Instrument dimensions ............................................... 222
■
Instrument clearances ................................................ 222
■
Environmental requirements .......................................... 223
■
Electrical requirements ............................................... 224
■
Electrical protective devices ........................................... 224
■
Network requirements ............................................... 225
■
Safety requirements ................................................. 225
Instrument dimensions
Ensure that the installation site bench space can accommodate the dimensions and
support the weight.
Configuration
Height Length (depth) Width Weight
(Door Closed)
(Door Open)
44.2 cm (17.4 in.)
56.9 cm (22.4 in.)
64.8 cm (25.5 in.) 49.5 cm (19.5 in.) 53.5 kg (118 lbs)
WARNING! PHYSICAL INJURY HAZARD. Do not aempt to lift or move the
instrument without professional assistance. The crated instrument is heavy.
Any incorrect lifting or moving of the crated instrument can cause serious
injury.
Instrument clearances
During instrument setup and maintenance, it is necessary to access the back and sides
of the instrument. If the back of the instrument faces a wall, it will be necessary to
have enough space to rotate the instrument on the bench for access.
IMPORTANT!
For safety, the power outlet used for powering the instrument must be
accessible at all times.
Component Top Front Left Right Back
SeqStudio
™
Genetic
Analyzer
30.5 cm
(12.0 in)
30.5 cm
(12.0 in)
10.0 cm
(4.0 in)
20.0 cm
(8.0 in)
10.0 cm
(4.0 in)
G
222
SeqStudio
™
Genetic Analyzer Instrument and Software User Guide