2.
Manage the plate or injections:
Touch To
View results View the list of injections and status.
Edit plate For injections that have not yet been run, edit Sample Name,
Run Module, Dye Set, Size Standard, Sample Type, and custom
fields.
Pause plate Stop the run after the current injection is complete.
Touch Resume to continue the run.
Stop current
injection
Stop the current injection immediately.
Touch Resume to continue the run.
Cancel remaining
injections
Specify whether to cancel the run immediately or after the
current injection is complete.
Injection options Move an injection to the top of the injection list, edit run
module information, and/or reinject samples.
View results for the plate when the run is completed (all injections are nished).
1.
Touch Results to view the run results.
Common Callouts and Arrows
1. Copy-paste a callout or arrow to use in this SVG.
Note: If you need more advanced callouts or arrows
use the TechComm_Inkscape_Callout&Arrow_Libary.
3. Delete this text, this rectangle, and unused
callouts, arrows, or other SVG elements
before adding this SVG to the repository.
2. Edit number and/or line-length, as needed.
1 1
1
1
2.
Touch List view.
Each injection group displays a QC color for each capillary:
• —All QC tests passed.
• —At least 1 warning quality alert was triggered.
• —At least 1 failing quality alert was triggered.
For information on quality alerts, see:
• “Data quality alerts“ on page 119
• “Sizecalling and basecalling quality alerts“ on page 119
View results when
the run is
completed
Chapter 7 Start and monitor a run
Monitor a run from the instrument
7
SeqStudio
™
Genetic Analyzer Instrument and Software User Guide
107
To Next Page
Loading...
