Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer - Sign a Plate Setup; View E-Signature Records for a Plate Setup

Sign a plate setup
1.
Create or open a plate setup, make changes as needed, then save the plate setup.
2.
In the Plate Properties tab, touch More Options, then touch the Sign Plate buon
at the boom left of the screen.
3.
Select a Signature meaning.
4.
Enter your password, then touch Sign.
View E-signature records for a plate setup
1.
Open a plate setup.
2.
In the Plate Properties tab, touch More Options, then touch the Signing records.
Status Meaning
Current The plate has not been modified after the
plate was signed.
Obsolete The plate has been modified after the
plate was signed.
Chapter 4 Use the instrument with the Security, Auditing, and E‑signature (SAE) v2.0 module
Sign a plate setup
4
SeqStudio
™
Genetic Analyzer Instrument and Software User Guide
63