A run is accessible from the Plate Manager for 24 hours after the run is complete, or
until another run is started.
You can open the Remote Monitoring App immediately after you save a plate setup or
at a later time.
In the Plate Manager on the Connect cloud-based platform:
• To open the Remote Monitoring App immediately after you save a plate setup
and start the run, click Monitor my run.
Open the Remote
Monitoring App
from the Plate
Manager
Chapter 7 Start and monitor a run
Monitor a run from the Connect cloud-based platform
7
SeqStudio
™
Genetic Analyzer Instrument and Software User Guide
97
To Next Page
Loading...
