Safety and electromagnetic compatibility (EMC) standards
The instrument design and manufacture complies with the following standards and
requirements for safety and electromagnetic compatibility.
Safety compliance
Reference
Description
EU Directive 2014/35/EU European Union “Low Voltage directive”
EN 61010-1
UL 61010-1
CSA C22.2 No. 61010-1
Safety requirements for electrical equipment for measurement, control, and laboratory
use – Part 1: General requirements
EN 61010-2-010
Safety requirements for electrical equipment for measurement, control and laboratory
use – Part 2-010: Particular requirements for laboratory equipment for the heating of
materials
EN 61010-2-081 Safety requirements for electrical equipment for measurement, control, and laboratory
use – Part 2-010: Particular requirements for automatic and semi-automatic
laboratory equipment for analysis and other purposes
EN 60825-1 Safety of lasers products – Part 1: Equipment classification and requirements
EMC
Reference
Description
EU Directive 2014/30/EU European Union “EMC Directive”
EN 61326-1 Electrical equipment for measurement, control and laboratory use – EMC
requirements – Part 1: General requirements
AS/NZS CISPR 22 Limits and Methods of Measurement of Electromagnetic Disturbance
Characteristics of Industrial, Scientific, and Medical (ISM) Radiofrequency
Equipment
ICES-003, Issue 5 Industrial, Scientific and Medical (ISM) Radio Frequency Generators
FCC Part 15 Subpart B (47 CFR)
U.S. Standard Radio Frequency Devices
Appendix H Safety
Safety and electromagnetic compatibility (EMC) standards
H
232
SeqStudio
™
Genetic Analyzer Instrument and Software User Guide
To Next Page
Loading...
