Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer - Edit Analysis Settings; Modify the Default File Name Convention

Factory-installed items cannot be edited or deleted. To create a new item from a
factory-installed item, copy, edit, then save the new item.
1.
In the Properties tab, click Seing Details, or select Actions4Manage analysis
seings.
2.
To create new analysis seings:
a.
Select the default analysis seings or user-created analysis seings, then
click Copy.
b.
Enter a name and edit seings as needed (see “Fragment/HID analysis
seings (size calling)“ on page 126 or “Sequencing seings (base calling)“ on
page 129).
c.
Click Save.
3.
As needed, select an analysis seing of interest, then click Edit or Delete
(user-created seings only).
4.
Click Close.
The le name convention determines how the data les (AB1 or FSA) associated with
a plate are named.
The default le name convention is:
Application
Default settings
Fragment/HID analysis <well>_<sample name>_<sample type>_<date and timestamp>.fsa
Sequence analysis <well>_<sample name>_<date and timestamp>.ab1
Sequence analysis with the
Sanger variant analysis
option selected
<well>_<sample name>_<amplicon>_<specimen>_<date and
timestamp>.ab1
To change the default seings, in the Properties tab:
1.
Select Actions4Edit the le name convention.
2.
Click File aributes, then select the aributes to include in the data le name.
Note: The timestamp aribute cannot be deselected; it is always included in the
data le name.
Edit analysis
settings
Modify the default
file name
convention
Chapter 5 Create or modify a plate setup from the Plate Manager
Additional plate settings (Plate Manager)
5
SeqStudio
™
Genetic Analyzer Instrument and Software User Guide
75