Toro Groundmaster Series - Page 311

Gearbox(continued)
5.Applymediumstrengththreadlockingcompoundtothethreadsoftheset
screwsandstartthesetscrewsinthepulleyhub.
6.Fitthepulleytotheoutputshaftwiththesetscrewstowardthegearboxand
alignthebottomofthepulleyhubushwiththeendoftheoutputshaft.
7.Tightenthesetscrewsfrom15to18N∙m(130to160in-lb).
8.Securethegearboxassemblytothecuttingwiththepreviouslyremoved
fastenersandinstallthedrivebelt.
9.Tightenthedrainplugfrom20to27N∙m(15to20ft-lb).
10.Fillthegearboxwithapproximately283ml(12oz)petroleumorsynthetic
SAE80W–90gearlube.
11.Installthecopperwasherandtightenthedipstick/breatherfrom8to11N∙m
(72to96in-lb).
12.InstallthePTOguard.
13.Installthebeltcovers.
Groundsmaster
®
3200,3300and3310
Page8–19
CuttingUnits:ServiceandRepairs
19240SLRevA