1-2 Rev. 000 TX525 Service Manual
SAFETY INFORMATION
Hydraulics Safety
• Inspect all hydraulic line connectors and ttings. Make
sure all hydraulic hoses and lines are in good condition
before applying pressure to the system.
• Keep body and hands away from pin hole leaks or
nozzles that eject high pressure hydraulic uid. Use
cardboard or paper to nd hydraulic leaks. Hydraulic
uid escaping under pressure can penetrate the skin
and cause injury. Fluid accidentally injected into the
skin must be surgically removed within a few hours by a
doctor or gangrene may occur.
• Before disconnecting or performing any work on the
hydraulic system, lower the loader arm/attachment to the
ground and stop the engine so all pressure is relieved.
• Be sure you understand a service procedure before
working on the machine.
To Next Page
Loading...
