DRIVE SYSTEM
7-80 Rev. 000 TX525 Service Manual
6. Press a new bearing into the road wheel so that
the bearing shoulder is facing the grease seal (Fig.
1559).
Fig 1559 PICT-4535a
7. Apply grease to the grease seal lip (Fig. 1560).
Important: Take care that no grease gets on the
inside diameter of the road wheel bearing.
Fig 1560 PICT-4537
Road Wheel Installation
1. Clean the track guide of all debris.
2. Slide the road wheel onto the track guide (Fig.
1561).
Fig 1561 PICT-4529
3. Apply thread locking compound to the road wheel
bolt (Fig. 1562).
Fig 1562 PICT-4539a
To Next Page
Loading...
