Toro TX525 - Spool Loader Valve Installation

HYDRAULIC SYSTEM
6-5TX525 Service Manual Rev. 000
16. Transfer all ttings and the handle over to the re-
placement 2 spool loader valve.
15. Remove the handle from the valve and transfer it to
the replacement valve (Fig. 0847).
Fig 0847 PICT-2584a
1. Remove the protective caps from the hydraulic lines
and ttings.
2. Position the 2 spool loader valve into the control
panel (Fig. 0848).
Fig 0848 PICT-4896
3. Use a 1/2” socket and wrench, install the 3 mounting
bolts and lockwashers to secure the 2 spool loader
valve to the control panel (Fig. 0849).
Fig 0849 PICT-4888
2 Spool Loader Valve Installation