Toro TX525 - Hydraulic Tandem Pump Assembly

HYDRAULIC SYSTEM
6-54 Rev. 000 TX525 Service Manual
Hydraulic Tandem Pump Assembly
13. Install the second bushing onto the 2 gears (Fig.
1034).
1. Making note of the marks on the 14 gpm pump, slide
the drive gear shaft of the 14 gpm pump assembly
onto the mounting ange (Fig. 1036).
Fig 1034 PICT-2881a
Fig 1036 PICT-2885a
2. Install the drive link onto the drive gear of the 14
gpm pump assembly (Fig. 1037).
14. Inspect the drive link for damage (Fig. 1035).
Fig 1037 PICT-2886a
Fig 1035 PICT-2884a