Toro TX525 - Tilt Cylinder Disassembly

HYDRAULIC SYSTEM
6-106 Rev. 000 TX525 Service Manual
Tilt Cylinder Disassembly
1. Remove the piston wear ring from the ram assembly
(Fig. 1231).
3. Remove the back-up piston seal from the ram
assembly (Fig. 1233).
Fig 1231 PICT-2961
Fig 1233 PICT-2963a
4. Using a 1-1/2” socket, remove the nut from the ram
assembly (Fig. 1234).
2. Carefully remove the seal from the ram assembly
(Fig. 1232).
Fig 1234 PICT-2964a
Fig 1232 PICT-2962