This service manual was written expressly for Toro service technicians. The Toro company has made every effort to
make the information in this manual complete and correct.
Basic shop safety knowledge and mechanical/electrical skills are assumed. The Table of Contents lists the systems
and the related topics covered in this manual.
For service information on drive systems, please refer to the Hydro-Gear BDP-10A/16A/21L Pump service manual
(form no. 492-4789), Hydro-Gear P Series Pump service manual (form no. BLN 52503) and Parker-Ross TF wheel
motor service manual (form no. 492-4753). For information specic to the engines used on this unit, refer to the
appropriate engine manufacturer’s service and repair instructions.
Units covered on in this manual are: TX525 Wide and Narrow Track, model years 2007 - current
The manual may also be specied for use on later model products.
The hydraulic power system is precision machinery. Maintain strict cleanliness control during all stages of service
and repair. Cover or cap all hose ends and ttings whenever they are exposed. Even a small amount of dirt or other
contamination can severely damage the system.
We are hopeful that you will nd this manual a valuable addition to your service shop. If you have any questions or
comments regarding this manual, please contact us at the following address:
The Toro Company
LCB Technical Services
8111 Lyndale Avenue South
Bloomington, MN 55420
The Toro Company reserves the right to change product specications or this manual without notice.
ABOUT THIS MANUAL
Copyright© All Rights Reserved
©2010 The Toro Company
To Next Page
Loading...
