BRAKES
8-1TX525 Service Manual Rev. 000
1. Raise the machine and set it on jack stands. Refer to
“Lifting the Machine for Service” on page 7-1.
2. Place the brake handle in the “OFF” position.
3. Remove the rear access panel (Fig. 1635).
Parking Brake Assembly
Replacement
Brake Assembly Removal 270000100 -
270000999
Fig 1635 PICT-4505
Fig 1637 PICT-4259
5. Using 3/4” and 1/2” sockets, remove the 7 bolts and
nuts securing the rear frame cover to the frame and
fuel tank bracket. Remove the rear frame cover (Fig.
1637).
Note: The rear of the machine may have to be lifted
to reposition the jack stands so that the rear
frame cover can be removed.
Fig 1636 PICT-4504
4. Using a 3/8” socket, remove the 6 screws that
secure the left and right rear cover support panels to
the tower assembly (3 screws per panel). Remove
the panels (Fig. 1636).
To Next Page
Loading...
