Toro TX525 - Air Cleaner Assembly Removal

ENGINE
4-23TX525 Service Manual Rev. 000
10. Replacetheexhaustgasket(Fig.0160).
Fig 0160 PICT-3271
1. Usinga13mmsocket,removethe2boltsand
washerssecuringtheaircleanerbracketassembly
totheengineblock(Fig.0161).
Fig 0161 PICT-5232
Air Cleaner Assembly Removal
2. Movetheaircleanerassemblyoutofthewayofthe
#1cylinderinjectortoallowfortestingand/orservice
(Fig.0162).
Important: Keep the air cleaner assembly away from
the exhaust manifold area.
Fig 0162 PICT-5334
Fortestingandserviceoftheglowplugs,refertothe
KubotaServicemanual“KubotaD722/D902Tier2
DieselEngineServiceManual”(ToroFormNo.492-
4796)(Fig.0163).
Fig 0163 PICT-5337