6-18 Qualitek mR Owner’s Guide
• Comp Baseline: View or enter the Comp baseline.
• Cal Baseline: View or enter the Cal baseline.
• Leak Master: Internal (if installed) or External.
• Leak Rate Units: Select the preferred units for leak rate.
• Leak Rate Format: Select the level of precision for the displayed rate.
• Pneumatic SNR: Displays the Pneumatic SNR.
• Pressure Correction: The pressure correction feature is used to correct flow
reading due to pressure variations. Select the desired pressure correction
method: Disabled, Factor, Absolute, or Gauge. (See “Pressure Correction
Setup” later in this document.)
To Next Page
Loading...
