9-101
P0202
EAS20575
P0202
EAS33055
TROUBLESHOOTING
Item
Injector #2: malfunction in injector #2.
Fail-safe system
• Able to start engine (depending on the number of faulty cylinders)
• Able to drive vehicle (depending on the number of faulty cylinders)
Procedure
1. Connection of injector #2 coupler.
• Check the locking condition of the coupler.
• Disconnect the coupler and check the pins (bent or broken terminals and locking condition of the
pins).
2. Defective injector #2.
• Measure the injector resistance.
Refer to “CHECKING THE FUEL INJECTOR” on page 8-111.
Is the coupler condition normal?
YES
Go to step 2.
NO
a. Connect the coupler securely or replace the wire harness.
b. Execute the diagnostic mode. (Code D37)
Is it hear operating sound?
YES
Go to step 6.
NO
Go to step 2.
Is check result OK?
YES
Go to step 3.
NO
a. Replace the injector #2.
Refer to “THROTTLE BODY” on page 7-5.
b. Execute the diagnostic mode. (Code D37)
Is it hear operating sound?
YES
Go to step 6.
NO
Go to step 3.
To Next Page
Loading...
