YASKAWA DX200 - Page 176

8 System Setup
8.7 Shock Detection Function
8-89
182582-1CD
182582-1CD
MH900, DX200 Controller
• When the robot specification is added
(1) When the robot specification is added, move the cursor to the
instruction in the input buffer line and press [SELECT] to display
the DETAIL window.
(2) Move the cursor to “UNUSED” of “ROBOT/STATION”, and press
[SELECT].
(3) The selection box appears.
(4) Point the cursor to the robot/station to be added and press
[SELECT].
(5) When the addition of robot/station is completed, press [ENTER].
(6) The DETAIL window closes and the JOB CONTENT window
appears.
176 of 552