YASKAWA DX200 - Page 177

8-90
182582-1CD
182582-1CD
8 System Setup
8.7 Shock Detection Function
MH900, DX200 Controller
• When the shock detection level for the each axis change is
added
(1) Move the cursor over the instruction in the input buffer line, and
select [Select] to display the DETAIL EDIT window.
(2) Move the cursor to “UNUSED” of any “SENS(AXIS)” to change the
detection level, and press [SELECT].
(3) The selection box appears, and select “AXIS=”.
(4) Press [ENTER] after adding the items.
(5) The JOB CONTENT window appears, after closing the DETAIL
EDIT window.
177 of 552