YASKAWA DX200 - Page 183

8-96
182582-1CD
182582-1CD
8 System Setup
8.7 Shock Detection Function
MH900, DX200 Controller
6. Select the number of the maker initial value to be read.
– A confirmation dialog box appears.
– Select a maker initial value other than the “STANDARD” to enable
the high-sensitivity shock detection function.
7. Select {YES}.
– The tool load information is read into the tool file, and the TOOL
window appears.
When “NO” is selected, the tool load information is NOT read into
the tool file, and the TOOL window appears.
183 of 552