YASKAWA DX200 - Page 333

8-246
182582-1CD
182582-1CD
8 System Setup
8.23Safety Logic Circuit
MH900, DX200 Controller
2. The default setting is “NOT USED”. Press the select key on the
programming pendant and select one of “NOT USED”, “YSF21-E” and
“YSF25-E #n”. When the functional safety board (optional) is disabled,
“YSF25-E #n” is not displayed.
<When the functional safety board is disabled>
<When the functional safety board is enabled>
NOT USED : Not available in the safety logic circuit and on the functional
safety board.
YSF21-E : Available in the safety logic circuit.
YSF25-E #n: Available on the optional functional safety board.
Up to eight functional safety boards can be connected in the
controller. When using a functional safety board, specify its
board number.
YSF25-E #1 means the first functional safety board to be
used.
333 of 552