YASKAWA DX200 - Page 404

9 System Backup
9.3 Automatic Backup Function
9-18
182582-1CD
182582-1CD
MH900, DX200 Controller
K. DEVICE
Press {SELECT} to display the device list.
L. STORED FILE SETTING
Set the number of files to be stored by the automatic backup function.
The number mentioned on the right side of this item with “(Max)” indica-
tion is the maximum number of files that can be stored in the Compact-
Flash inserted when this window is displayed.
The settings range from 1 to (Max). When this setting value is changed,
the backup file arrangement starts. (Max is 100.)
M. BACKUP FILES
Indicates the existence of the files or the number of backup files stored
in the CompactFlash inserted when this window is displayed.
N. LATEST BACKUP FILE
Indicates the date of the latest file in the CompactFlash inserted when
this window is displayed.
O. ARRANGE
When the setting of maximum number of stored files is changed, the file
arrangement of the backup files in the CompactFlash is executed.
With this operation, the file arrangement can be performed without
changing the maximum number of stored files.
ARRANGE will not be displayed when the device of the CF: controller is
set on.
5. Set the desired item, and press [ENTER].
The Device Name in Display Explanation
CF: pendant Set the backup to the CompactFlash
of the programming pendant.
CF: controller Set the backup to the CompactFlash
of the YCP21 board. When the “CF:
controller” of the device name is not
shown, refer to 9.3.2.2 the
CompactFlash of the YCP21.
RAMDISK It will be shown when the optional
function of High Speed Ethernet
Server function is effective. It can
back up by the controller high speed
ethernet server function command.
Refer to the [controller Instruction
HIGH-SPEED ETHERNET SERVER
FUNCTION].
USB1: controller Set the backup to the USB memory of
the YCP21 board.
USB2: controller Set the backup to the USB memory of
the YCP21 board.
404 of 552