YASKAWA DX200 - Page 452

12 Modification of System Configuration
12.3Addition of Base and Station Axes
12-24
182582-1CD
182582-1CD
MH900, DX200 Controller
12.3.1.3 Axis Configuration Setting
The axis type is specified in the AXES CONFIG window.
1. Confirm axis type of each axis in the AXES CONFIG window.
– The axis type of each axis is displayed.
2. Select the axis type to be modified.
(1) The settable axis type is displayed.
(2) Select “BALL-SCREW” when the servo track is ball-screw type,
and “RACK&PINION” when the servo track is rack & pinion type.
After the selection, the window returns to the AXES CONFIG win-
dow.
(3) Select the axis type.
3. Press [ENTER] in the AXES CONFIG window.
4. The setting in the AXES CONFIG window is completed and the
window moves to the MECHANICAL SPEC window.
452 of 552