YASKAWA V1000 Series Installation & Start-Up Manual

5.5 Fault Detection
212 YASKAWA TM.V1000.01 V1000 Drive Installation & Start-Up Manual (Preliminary 01-19-07)
LED Operator Display Fault Name
oFA34
Option Card Fault (port A)
MEMOBUS/Modbus timeout
Cause Possible Solution
——
LED Operator Display Fault Name
oFA35
Option Card Fault (port A)
Drive side reception timeout (Initial #1)
Cause Possible Solution
——
LED Operator Display Fault Name
oFA36
Option Card Fault (port A)
CI check error (Initial #1)
Cause Possible Solution
——
LED Operator Display Fault Name
oFA37
Option Card Fault (port A)
Drive side reception timeout (Initial #2)
Cause Possible Solution
——
LED Operator Display Fault Name
oFA38
Option Card Fault (port A)
Control instruction selection error (Initial #2)
Cause Possible Solution
——
LED Operator Display Fault Name
oFA39
Option Card Fault (port A)
Drive side reception timeout (Initial #3)
Cause Possible Solution
——
LED Operator Display Fault Name
oFA40
Option Card Fault (port A)
One control response selection error (Initial #3)
Cause Possible Solution
——

YASKAWA V1000 Series Specifications

General

Model	V1000 Series
Series	V1000
Output Frequency	0.1 to 400 Hz
Overload Capacity	150% for 60 seconds
Type	AC Drive
Control Method	V/f Control
Input Voltage	200-240V, 380-480V
Output Voltage	0 to Input Voltage
Power Range	0.1 to 18.5 kW
Horsepower	0.2 to 25 HP
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit, Ground Fault
Communication Interfaces	Modbus RTU
Enclosure	IP20
Ambient Temperature	-10 to +50°C
Storage Temperature	-20 to +60°C
Humidity	5 to 95% RH (non-condensing)
Cooling Method	Fan Cooled