YASKAWA V1000 Series Technical Manual

YASKAWA AC Drive – V
Compact Vector Control Drive
Technical Manual Preliminary
Type: CIMR-VU
Model:  V Class, Three-Phase Input: . to . kW
 V Class, Single-Phase Input: . to . kW
 V Class, Three-Phase Input: . to . kW
To properly use the product, read this manual thoroughly and retain
for easy reference, inspection, and maintenance. Ensure the end
user receives this manual.
MANUAL NO. SIEP C A
Receiving
1
Mechanical
Installation
2
Electrical
Installation
3
Start-Up
Programming &
Operation
4
Parameter Details
5
Troubleshooting
6
Periodic
Inspection &
Maintenance
7
Peripheral Devices
& Options
8
Specifications
A
Parameter List
B
MEMOBUS/
Modbus
Communications
C
Standards
Compliance
D

YASKAWA V1000 Series Specifications

General

Model	V1000 Series
Series	V1000
Output Frequency	0.1 to 400 Hz
Overload Capacity	150% for 60 seconds
Type	AC Drive
Control Method	V/f Control
Input Voltage	200-240V, 380-480V
Output Voltage	0 to Input Voltage
Power Range	0.1 to 18.5 kW
Horsepower	0.2 to 25 HP
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit, Ground Fault
Communication Interfaces	Modbus RTU
Enclosure	IP20
Ambient Temperature	-10 to +50°C
Storage Temperature	-20 to +60°C
Humidity	5 to 95% RH (non-condensing)
Cooling Method	Fan Cooled