8.2 Peripheral Devices
The following table of peripheral devices lists the names of the various devices/options available for Yaskawa drives. Contact Yaskawa or your Yaskawa
agent to order these peripheral devices.
• Peripheral Device Selection: Refer to Yaskawa catalog for EMC filter selection and part numbers.
• Peripheral Device Installation: Refer to option manual for option installation instructions.
Table 8.1 Available Peripheral Devices
Name Name
Surge Protector DIN Rail Attachments
DC Reactor NEMA Type 1 Kit
AC Reactor DriveWizard
Single-Phase 200 V Reactor Connection Cable for Engineering Tools
Braking Resistor DriveWorksEZ
Heatsink External Mounting Attachment (Side-by-Side)
The following table lists some of the available peripheral devices found in the previous table along with a picture of the device to help identify and describe
situations that may require each device.
Table 8.2 Specific Peripheral Devices and Purposes
Device Purpose Device Purpose
AC Reactor
Protects the drive when the power supply is too
large.
Required for power supplies greater than
600 kVA.
Braking resistor For uses requiring dynamic braking.
DC Reactor
Harmonic suppression. Surge protector Suppresses surge voltage.
Improves the power factor of the power supply.
DriveSelect
DriveWizard
DriveWorksEZ
Software Engineering
Tools
Software for selecting drive capacity,
customizing and programming the drive.
8.2 Peripheral Devices
YASKAWA ELECTRIC SIEP C710606 18A YASKAWA AC Drive – V1000 Technical Manual (Preliminary)
269
8
Peripheral Devices &
Options
To Next Page
Loading...
Need help?
General
