YASKAWA V1000 Series Installation & Start-Up Manual

YASKAWA TM.V1000.01 V1000 Drive Installation & Start-Up Manual (Preliminary 01-19-07) 265
5.12 Drive Date Stamp Information
Troubleshooting
5
5.12 Drive Date Stamp Information
The drive date stamp located on the lower right side of the drive indicates the
manufacturing date of the drive. This information helps technicians determine if
the drive is within the warranty period.
Figure 5.3
Figure 5.3 Date Stamp Location
A – Manufacture Date B – Inspector
PRD
INSPE
96 3. 31
00.7.22
1
2

YASKAWA V1000 Series Specifications

General

Model	V1000 Series
Series	V1000
Output Frequency	0.1 to 400 Hz
Overload Capacity	150% for 60 seconds
Type	AC Drive
Control Method	V/f Control
Input Voltage	200-240V, 380-480V
Output Voltage	0 to Input Voltage
Power Range	0.1 to 18.5 kW
Horsepower	0.2 to 25 HP
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit, Ground Fault
Communication Interfaces	Modbus RTU
Enclosure	IP20
Ambient Temperature	-10 to +50°C
Storage Temperature	-20 to +60°C
Humidity	5 to 95% RH (non-condensing)
Cooling Method	Fan Cooled