YASKAWA V1000 Series Installation & Start-Up Manual

YASKAWA TM.V1000.01 V1000 Drive Installation & Start-Up Manual (Preliminary 01-19-07) 267
6
Periodic Inspection
& Maintenance
This chapter describes the periodic inspection and
maintenance of the drive to ensure that it receives
the proper care to maintain overall performance.
6.1 SECTION SAFETY . . . . . . . . . . . . . . . . . . . . . . . . 268
6.2 INSPECTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272
6.3 PERIODIC MAINTENANCE . . . . . . . . . . . . . . . . . 276
6.4 DRIVE COOLING FANS . . . . . . . . . . . . . . . . . . . . 278
6.5 DRIVE REPLACEMENT . . . . . . . . . . . . . . . . . . . . 282

YASKAWA V1000 Series Specifications

General

Model	V1000 Series
Series	V1000
Output Frequency	0.1 to 400 Hz
Overload Capacity	150% for 60 seconds
Type	AC Drive
Control Method	V/f Control
Input Voltage	200-240V, 380-480V
Output Voltage	0 to Input Voltage
Power Range	0.1 to 18.5 kW
Horsepower	0.2 to 25 HP
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit, Ground Fault
Communication Interfaces	Modbus RTU
Enclosure	IP20
Ambient Temperature	-10 to +50°C
Storage Temperature	-20 to +60°C
Humidity	5 to 95% RH (non-condensing)
Cooling Method	Fan Cooled