<5. Functions>
159
IM 01E21A02-03EN
When the microSD card cannot be accessed to remove, the icon of “Disable to access the
microSDcard”isdisplayed.
Insert the microSD card again when it is necessary to use this function again. The alarm of
“microSDfailure”occurswhenthemicroSDcardhasanyproblems.
Ready for the microSD card Accessing the microSD card
Disable to access the microSD
card
IMPORTANT
• Before using the data logging function, make sure that the microSD card is prepared. It takes
approximately one minute until the product is ready to store data in the microSD card after it
has been turned on.
• Note that if the microSD card runs out of free space, the subsequent data will not be stored.
NOTE
Do not remove the microSD card while the data logging function is running.
To Next Page
Loading...
