Allen-Bradley E300 User Manual

590 Rockwell Automation Publication 193-UM015E-EN-P - October 2015
Chapter 10 EtherNet/IP Communication
8. Additional module definition changes to E300 relay can be made. Press
OK when finished making all module definition changes.
9. Press Ye s to apply these changes to the module definition and to update the
configuration parameters with the data from the upload command.
Pressing No ignores all changes and returns the E300 relay device profile
back to its default settings.

Allen-Bradley E300 Specifications

General

Type	Electronic Overload Relay
Mounting	DIN Rail or Panel Mount
Protection Class	IP20
Voltage Range	24…690 V AC/DC
Communication Options	EtherNet/IP, DeviceNet
Protection	Overload, phase loss, ground fault
Operating Temperature	-20°C to 60°C