Allen-Bradley E300 User Manual

Rockwell Automation Publication 193-UM015E-EN-P - October 2015 591
EtherNet/IP Communication Chapter 10
10. Navigate through the E300 Overload Relay device profile tree to make
additional configuration edits. When finished, press OK.
11. For users who are adding a preconfigured E300 relay offline in an RSLogix
5000 or Studio 5000 project, download the updated project to the Logix
controller to establish communication between the E300 relay and the
Logix controller and to apply these changes to the Logix controller and
E300 relay.
For users who are adding a preconfigured E300 relay online to a ControlLogix
controller, a display appears verifying the intent to create a module online.

Allen-Bradley E300 Specifications

General

Type	Electronic Overload Relay
Mounting	DIN Rail or Panel Mount
Protection Class	IP20
Voltage Range	24…690 V AC/DC
Communication Options	EtherNet/IP, DeviceNet
Protection	Overload, phase loss, ground fault
Operating Temperature	-20°C to 60°C